Hydrophilic coated aluminum foil use for air conditioner

8011 8079 8006 Hydrophilic coated aluminum foil use for air conditioner use the high corrosion-resistant water-based anti-corrosion coating is obviously a hydrophilic coating, and it is coated on the aluminum foil to obtain a hydrophilic aluminum foil coil, which is made of hydrophilic aluminum foil. When heat exchange components, such as air conditioner fins, are used in a refrigeration environment, when the surface temperature is lower than the dew point of the ambient air, the moisture in the ambient air condenses into water droplets, which not only reduces the heat exchange effect of the refrigeration system, but also increases Energy consumption, especially when the air conditioner performs heating work in an environment where the outdoor air is below zero, the heat exchange component of the outdoor body is responsible for converting the outdoor heat into the room, and the water droplets condensed on the surface of the heat exchange component are below zero in the outdoor air. The environment must freeze into frost and adhere to the surface. On the one hand, the heat exchange effect is sharply reduced. On the other hand, in order to ensure continuous operation, the air conditioner has to temporarily stop the heating operation, start the defrosting program, and run the cooling in the opposite direction. Heat is generated in the heat exchange parts of the outdoor body to remove the frost condensed on the surface of the heat exchange parts of the outdoor body, which not only causes a waste of energy for defrosting, but also causes the air conditioner to heat up when the outdoor air is under sub-zero temperature. low effect;



8011 8079 8006 Hydrophilic coated aluminum foil produced by Signi is used for air conditioner, and more importantly, the heat exchange parts made of it, such as air conditioner fins, are used in refrigeration environments, when the surface temperature is lower than the dew point of the ambient air , the moisture in the ambient air will inevitably condense into water droplets, which inevitably contain acid, alkali, salt or other corrosive components in the case of environmental pollution, which will undoubtedly rust the surface of the aluminum foil, greatly reducing the its corrosion resistance.