Printed coated aluminium foil

The printed / coated of aluminium foil as the substrate is called aluminium foil printing. Printing can make a new binding design for aluminium foil, which will arouse consumers' desire to buy and improve the sales value of the products. Printed aluminium foil is widely used in food, medicine, cosmetics packaging and other decorative materials.

aluminium foil, which is different from the general printing paper, with thenon absorbable property,iIt has poor affinity to ink in printing and can not achieve normal ink transfer,therefore, surface treatment must be carried out. The surface treatment before aluminium foil printing is mainly pre coating. In addition to improving the transfer capability of the ink, the pre coating also has the ability to increase the corrosion resistance. According to the requirements, the pre coating before the aluminium foil printing can be similar to the aluminium foil coloring process, and the aluminium foil coating process can also be used.


 
aluminium foil printing products are mainly used for flexible packaging materials. According to specific conditions, the basic characteristics of printing ink are shown in table A below:
The main components of aluminium foil printing ink are pigments, resins and volatile organic solvents. The nature of the pigment determines the color of the ink, the coloring force and the acid resistance, alkali resistance, water resistance and light resistance, as well as the drying, covering and density of the ink,etc.
 
A: characteristics of printing ink for soft packaging materials

characteristics of printing ink	Main contents and basic requirements
Light resistance	It does not produce discoloration and colour fading  under light irradiation
Friction resistance	Ink can not fall off when friction
Folding resistance	After printing, there is no big bending in processing and packaging
Sticky page resistance	In the crimp state, the printing surface can not produce sticky pages with other surfaces.
Luster	To enhance the value of packaged goods, the printing surface should be glossy.
No bad odor	The solvent can't leave a bad odor on the film
Health safety	Ink can't harm the health of the human body
Solvent resistance	Compound processing has certain adaptability to solvents in adhesives
Drug-resistant character	Anti acid, anti alkaline
Oil resistance	Oil resistance to oily food
Heat resistance	Heat resistance in post processing (composite, bag making, packaging)
Water resistance	After printing, the ink layer can not be stripped from water
Boiling resistance	Have this requirement for steamed goods
Freeze resistance	The performance of refrigerated goods in cold places
Gas resistance	Performance of packaging materials using gas heating sterilization
Radiation-resistant linearity	The properties of packaging materials for radiation sterilization

 
Main alloys: 8011,8006,8079,8021, etc
Main temper: O, H14, H18, etc
Thickness: 0.006mm-0.20mm
The product category of Printing aluminium foil: plain foil, gold foil, single -side gold foil, Double-side gold foil,monochrome foil, polychromatic foil, laser anti-counterfeit foil, Pharmaceutical PVChard sheet, soft double aluminium of easy-tear film, tropical aluminium foil, PharmaceuticalPVC / PVDC PVC / PE / PCDC high barrier composite hard sheet,Pharmaceutical PVC/PE composite hard sheet, etc.
Uses: medicine, food, cosmetics packaging and other decorative materials.
 
Main products:
1)Pharmaceutical PTP aluminium foil, capsule aluminium foil,
Pharmaceutical PTP aluminium foil packaging is mainly used for blister-style packaging of tablets, capsules, pills, etc., and can also be used for blister-style packaging of food and health products.
The Pharmaceutical PTP aluminium foil packaging has good moisture resistance, oxygen resistance, light avoidance and excellent barrier property. It can effectively avoid the destruction of the drug components by gas, light and other media.
Product structure:OP protective coating / AL (aluminium foil) / hot sealing coating
Product specifications:
Thickness: 0.024mm +/-0.01mm
Width: 100mm ≤ Width ≤ 600mm
Weight: 10Kg to 20Kg
Roll diameter: 75mm
Outer roll diameter: 360mm (can be re-rolled according to your request)
 
Product properties:
1. PTP aluminium foil packaging is mainly used in aluminium plastic blister-style packaging for tablets, capsules and pills. It has a new appearance and promotes the image and competitiveness of drugs.
2, PTP aluminium foil packaging has good shading performance, moisture resistance, gas retention and odor retention properties.
3, PTP aluminium foil and PVC hard sheet hot sealing, easy to open.
Package details:
1.The internal packing is packed in thin film bag.
2- In the middle is cushioning foam packaging;
3-Outside packaging is three layers of carton.
 
2)Soft double aluminium of easy-tear film
The Soft double aluminium of easy-tear film has the advantages of high barrier, easy to tear, easy to take, and light resistant and printable. It can replace of glass paper and has lower cost. Our production process can be adjusted according to the size and smoothness of packaged drugs, so that it is easier to use.
 
TechnicaI Data Sheet

Product Structure	AL30/PE30-40
Usage	It can be used for strip packing of solid medicines such as tablets, capsules, suppositories,etc.

 

 
 
3)Tropical aluminium foil
Tropical aluminium foil is a kind of high barrier composite material. The effect of moisture-proof and oxygen resistance is good to avoid light and with high anti-counterfeiting quality. It is easy to heat seal with the PVC and replace the SP composite bag. It improves the grade of the drug, reduces the labor and cost, meets the concept of low carbon green environment, and is used for more and more drugs.
 
TechnicaI Data Sheet

Product Structure	PA25/AL45/VC	PA25/AL60/VC	PA25/AL75/VC
g/m2	150g	200g	240g
Width	≤600mm
The ID	76mm
Outside the coil diameter	240-280mm

 
 
4)Pharmaceutical PVC hard sheet
Product structure: PVC( Polyvinyl Chloride) hard sheet
Product specification: width ≤1000mm  thickness 0.06mm- 0.45mm
ID:76mm   OD: ≤500mm
Product properties: can plastic uptake easy to form and heat sealed.
Product features: our products have good transparency, less crystal dot bubbles, less rhyoling, good shape and adaptability to PTP aluminium foil.
Product uses: it can be used for packaging tablets, capsules and pills, and also for food candy,chocolate .And with the Blister-style packing for chewing gum, etc.
 
5)PharmaceuticalPVC / PVDC PVC / PE / PCDC high barrier composite hard sheet
Product structure: PVC (polyvinyl chloride) /PVDC (poly vinylidene chloride)
PVC (polyvinyl chloride) /PE (low density polyethylene) /PVDC (poly vinylidene chloride)
Product specifications: Width:≤1000 mm ;Thickness :0.06mm-0.45mm ;ID 76mm ;
OD:≤500mm (also can be produced according to customer requirements)
Product features: good barrier effect, can plastic uptake shaping, easy to hot seal with PTP aluminium foil , good sealing performance, transparent and intuitive, lower cost than cold-formed aluminium, high cost performance
Product usage: it is used for blister packaging of tablets and capsules with high barrier requirements.
This product is now being used for more and more middle and high grade blister packaging with easy to absorb moisture and easy oxidizable tablets and capsules.
 
 
6)Pharmaceutical PVC/PE composite hard sheet
Product structure:PVC/PE
Specification: Width:≤600mm, PVC thickness: 0.10mm-0.25mm, PE thickness 0.02mm-0.05mm, ID: 76mm, OD: ≤500mm (or customized according to customer ‘s requirements)
Advantage:
Highly transparent, very few fish eyes, stomata and flowing stripe, high fitness, easy to heat seal.
Main applications:
It is suitable for packaging materials such as liquid, injecting agent in medicine field, suitable for food, vegetable, jam and other packaging materials.